BDR515 Hardware Guide

Original PDF
ioSafe BDR515 Hardware Guide
910-11762-00 Rev03 HARDWARE GUIDE, BDR515
2
Table of Contents
Chapter 1: Before You Start
Package Contents ............................................................................................................................................... 3
ioSafe at a Glance ............................................................................................................................................... 4
Safety Instructions ............................................................................................................................................... 5
Chapter 2: Hardware Setup
Connecting Your ioSafe ...................................................................................................................................... 6
Chapter 3: Initial Start-up
Powering up the System ..................................................................................................................................... 7
Activating ShadowProtect ................................................................................................................................... 8
Chapter 4: Component Replacement
Tools and Parts for Hard Disk Installation ......................................................................................................... 10
Install or Replace Hard Disks ............................................................................................................................ 10
Replace System Fan Assembly ........................................................................................................................ 14
Chapter 5: Product Support
Data Recovery Proceedure ............................................................................................................................... 15
Contact Us ........................................................................................................................................................ 15
Appendix A: Specifications
Appendix B: LED Indication Table
3
Chapter 1: Before You Start
Before you start setting up the ioSafe, please check the package contents to verify that you have received the
items below. Please also read the safety instructions carefully before use to prevent your ioSafe from any
damages.
Package Contents
Main unit x1
AC power cord x1
RJ-45 LAN cable x1
3mm Hex Tool x1
Hex Tool Magnet x1
USB Recover Media x1
4
ioSafe at a Glance
No.
Article Name
Description
1)
HD Indicators Front Panel
The LED indicator is used to display the status of the internal disks. For more
information, see "Appendix B: LED Indication Table" on Page 17.
2)
USB 2.0 Ports Front Panel
The ioSafe offers USB ports for adding additional external hard drives, USB
printers, or other USB devices.
3)
LAN Indicators Front Panel
The LED indicator is used to display the status of the LAN Connections. For
more information, see "Appendix B: LED Indication Table" on Page 17.
4)
Power Button Front Panel
The power button is used to turn your ioSafe on or off.
To turn off your ioSafe, press the Power Button and hold it until you hear a beep
sound and the Power LED starts blinking.
5)
Locator Front Panel
The LED indicator is used to display the status of the internal disks and the
system. For more information, see "Appendix B: LED Indication Table" on Page
17.
6)
Fan Alert
Indicator
Front Panel
The Fan Alert indicator is used to display an error with the fans.
7)
Raid
Management
Port
Back Panel
Used to configure and communicate directly with the RAID Card.
8)
UID LED
“Locator”
Back Panel
When the UID button is pressed, the front Locator and rear UID LED indicator
flashes blue. Press the UID Reset button again to stop the indicator from
flashing.
UID Reset
“Locator”
9)
D-Sub Port Back Panel
VGA Port for connecting a monitor
5
No.
Article Name
Description
10)
LAN 1 Port Back Panel
The LAN ports are where you connect RJ-45 cable to the ioSafe.
11)
LAN 2 Port Back Panel
The LAN ports are where you connect RJ-45 cable to the ioSafe.
12)
Power Port Back Panel
The power port is where you connect the power cord to the ioSafe.
13)
IPMI LAN Port Back Panel
Intelligent Platform Management Interface (IPMI) is a set of computer
interface specifications that provides management and monitoring capabilities
independently of the host system's CPU, firmware (BIOS or UEFI)
and operating system.
14)
USB 3.0 Ports Back Panel
The ioSafe offers USB ports for adding additional external hard drives, USB
printers, or other USB devices.
Safety Instructions
Before cleaning, unplug the power cord first. Wipe ioSafe product with damp paper towels.
Do not place the ioSafe
product on a cart, table, or desk, which is not stable to avoid the product
from falling over.
The power cord must plug in to the right supply voltage. Make sure that the supplied AC voltage
is correct and stable.
To remove all electrical current from the device, ensure that all power cords are disconnected
from the power source.
Risk of explosion if battery
is replaced with an incorrect type. Dispose of used batteries
appropriately.
3-2-1
At ioSafe, we suggest a minimum of the "3-2-
1 Rule" for backup: Make 3 complete copies of your
data, keep them on at least 2 separate systems, and have at least 1
protected from natural
disaster.