LED Behavior
LED Name | Color | State | Description |
|---|---|---|---|
Power | Blue | Static | Indicates that the unit is powered on. |
Blinking | The unit is booting up or shutting down. | ||
Off | The unit is powered off. | ||
Status | Green | Solid | The unit is operating normally. |
Orange | Blinking | Indicates one of the following states:
| |
Off | Indicates one of the following states:
| ||
Drive Activity LEDs #1-2 | Green | Static | The corresponding drive is ready and idle. |
Blinking | The corresponding drive is being accessed. | ||
Orange | Solid | Indicates a drive error for the corresponding drive. | |
Off | No internal drive installed in the corresponding drive bay, or the drive is in hibernation. | ||
Copy | Green | Static | The attached peripheral device has been detected. |
Blinking | Data is being copied from the peripheral to the unit. | ||
Off | No peripheral device detected. | ||
Top Rear LAN LEDs #1-2 | Green | Solid | The network is connected. |
Blinking | Indicates that network activity is happening. | ||
Off | There is no network connected or the Ethernet cable is disconnected. | ||
Bottom Rear LAN LEDs #1-2 | Green | Solid | 1 Gbps connection |
Orange | Solid | 100 Mbps connection | |
Off | 10 Mbps connection or no network detected | ||